WOODWARD 5501-470 NetCon 5000 Control Processor
WOODWARD 5501-470 is the CPU module of the Woodward NetCon 5000 digital control platform. It occupies the CPU slot of the NetCon chassis, carries a manual reset and a 9-pin connector, and reports operating status through front-panel LEDs. The NetCon 5000 platform itself is described by Woodward as a 32-bit microprocessor control with an advanced memory system, designed for turbine control.
Product Datasheet
- Brand: Woodward
- Catalog Number: 5501-470
- Module Designation: CPU_040
- System Platform: Woodward NetCon 5000 digital control
- Platform Architecture: 32-bit microprocessor control with advanced memory system, designed for turbine control
- Memory Configuration: without LL memory
- Reset: manual reset
- Connector: 9-pin
- Status Indication: front-panel LEDs
- Mounting: panel mount, CPU slot of the NetCon chassis
- Application: turbine and engine control systems built on the NetCon 5000 platform
- Handling: electrostatic sensitive device
Fault Troubleshooting and Common Questions
- The CPU does not complete its self-test at power-up. Check the chassis power supplies and the seating of the module in the CPU slot, confirm that the retention hardware is engaged, and observe the front-panel LEDs through the start-up sequence. Verify that the loaded application and firmware match the chassis configuration.
- The processor runs but the application does not start. Confirm that the correct application file is loaded for this chassis and that the memory configuration matches the module variant in use. A CPU supplied without LL memory must be paired with the system design that does not require it.
- Communication with I/O modules is lost. Check the backplane and the network connections of the associated I/O and communication modules, and confirm that no module was removed or replaced without updating the configuration. Use the Woodward service tool to read diagnostics before replacing hardware.
- A replacement CPU behaves differently from the original. Compare the catalog number suffix and memory variant, the hardware revision, and the firmware version before installation. A module with a different memory configuration will not match an application written for the other variant; confirm the correct catalog number against the system bill of materials.
Safety Precautions
- Only qualified personnel familiar with the NetCon platform may install, configure or replace the module.
- Use a grounded wrist strap and ESD-safe packaging when handling the board; it is an electrostatic sensitive device.
- Isolate the chassis power and follow lockout/tagout procedures before removing or inserting the module, unless the system documentation specifically permits live replacement.
- Do not touch the backplane connectors or bend the module pins; verify full engagement of the connectors before energizing the chassis.
- Confirm that the application, firmware and memory configuration are compatible before commissioning, and keep a verified backup of the program.
![]()
Company Overview
Main Products
We specialize in supplying original imported spare parts for DCS, PLC, robotics, and large servo systems from leading global brands, including:
- FOXBORO | EMERSON | TRICONEX | XYCOM | BENTLY
- ROCKWELL | ABB | GE | Aen-Brady | YOKOGAWA
- HONEYWELL | RELIANCE | SCHNEIDER | MODICON
- Westinghouse | WOODWARD | Motorola | Rexroth | SEW
☀️Tiana Lai(Sales Director)
?Email: ydf8801@163.com
?️Ship to you via DHL/TNT/UPS/EMS/Fedex
?Product Condition: One-year warranty
Contact us immediately to embark on a new experience of efficient procurement! ✨






There are no reviews yet.